RCPlanet
WALKERA QR X350 PRO QUADCOPTER RTF FPV DEVO F7 WITH ILOOK CAMERA WALQRX350PROFPV1
Main Rotor Diameter:, 556mm, Main Rotor Blade Length:, 206mm, Brushless Motor spec:, WK-WS-28-008A, Brushless ESC spec:, WST-15A(G/R), Receiver:, RX702, Battery:, 11.1V 5200mAh LiPo, Flight Time:, 25-30minutes, Length:, 289mm, Width:, 289mm, Height:, 200mm, Flying Weight:, =1350 g, Brushless gimble:, G-2D(Optional), Ilook HD Camera(resolution):, 720x1080, Goggle(option):, Walkera(E002)/Fatshark, Goggle resolution:, 640x480P, Video Range:, 1.5-2KM, DEVOF7 Control Range:, 1KM, Is Assembly Required:, NO, Rotor Type:, Quad-Copter, Experience Level:, Intermediate, ,
This is the Walkera QR X350 Quadcopter RTF (Ready-to-Fly) FPV ...RCPlanet
ALIGN T-REX 450 PRO FRAME HARDWARE AGNH45061
, ,
Features: Socket button head screw x 26 (M2.5x5mm) Socket button ...RCPlanet
TRAXXAS MAIN FRAME/SIDE PLATE/INNER RED DR-1 (2) TRA6331
, ,
This is the Traxxas Red Inner Side Plate with screws ...RCPlanet
TRAXXAS MAIN FRAME/SIDE PLATE/INNER BLUE DR-1 (2) TRA6332
, ,
This is the Traxxas Blue Inner Side Plate with screws ...RCPlanet
AIRTRONICS RX451R M11X SSR FHSS-3 2.4GHZ RECEIVER (FOR SSR SX) AIR92451
, Frequency/Modulation Type:, 2.4GHz/FHSS-3, Nominal Input Voltage:, 4.8v ~ 7.4v, Weight:, .019lbs (0.30oz), Dimensions:, 1.43 x 0.94 x 0.59in (36.5 x 24.0 x 15.0mm), Fail Safe:, Yes (Programmable on All Channels), Receiver Battery Fail Safe:, Yes (3.8v Default / 3.5v ~ 5.0v Adjustable), Connector Type:, Universal 'Z', Note:, This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack. Do NOT use a 3S Li-Po battery pack!, When using a 2S Li-Po battery pack you should NOT use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos., Do NOT use Analog servos with this receiver. Use ONLY digital servos. If you use analog servos, the servos and/or receiver could be damaged. In addition, some older ESCs may not support the extremely high frame rate of this receiver., ,
The Airtronics 92451 4-Channel 2.4GHz FHSS-3 Super Response Surface Receiver ...RCPlanet
ALIGN 700 CANOPY SUPPORT AGNHN7078
, Frame mounting bolt x 1:, F5.5xF4.5x61mm, Frame mounting bolt x 1:, F5xF6x61mm, Canopy spacer x 2:, F4.8xF11x22mm, Canopy support x 2:, F3xF5xF6.5x7.3mm, Socket screw x 2:, M3x14mm, Socket screw x 2:, M4x16mm, ,
Align 700 Canopy Support for T-REX 700 Nitro Pro.RCPlanet
INTEGY REALISTIC ROOF TOP SPOT LIGHT SET LED RED (3) INTC24139RED
, Frame Width:, 3.3" (83mm), Frame Height:, 1.2" (30mm), Light Diameter:, 0.84" (21.4mm), ,
This is the Integy Realistic Roof Top LED Spot Light ...RCPlanet
INTEGY REALISTIC ROOF TOP SPOT LIGHT SET LED (3) INTC24139BLACK
, Frame Width:, 3.3" (83mm), Frame Height:, 1.2" (30mm), Light Diameter:, 0.84" (21.4mm), ,
This is the Integy Realistic Roof Top LED Spot Light ...RCPlanet
ALIGN 450 SPORT V2 FUSELAGE PARTS AGNH45151
, Weight:, 19.6g, ,
Align fuselage parts for the -REX 450 Sport V2. Must ...RCPlanet
ALIGN 250PRO FUSELAGE PARTS AGNH25117
, Weight:, 6g, ,
This is the Align set of 250PRO Fuselage Parts for ...RCPlanet
ALIGN BLACK SHARK III 700 FUSELAGE BLUE/RED/BRONZE/WHITE AGNHF7002
, Length:, 56.0 in (1422mm), Width:, 9.25 in (235mm), Height:, 10.9 in (278mm), Weight:, 18.3 oz (520 g), ,
This is the Align Black Shark III 700 Fuselage Blue/Red/Bronze/White. ...RCPlanet
ALIGN BLACK SHARK III 700 FUSELAGE AGNHF7003
| Length | 56.0 in (1422mm) |
| Width | 9.25 in (235mm) |
| Height | 10.9 in (278mm) |
| Weight | 18.3 oz (520 g) |
, , ,
Align Black Shark III 700 fuselage is the result of ...RCPlanet
ALIGN AH-1 500 SCALE FUSELAGE AGNHF5007
, Body length:, 1125mm, Body width:, 330mm, Body height:, 244mm, Weight:, 1180g, ,
Due to the unique structure of the AH-1 helicopter, specific ...RCPlanet
ALIGN HIGH STRENGTH ENGINE FAN 600N AGNHN6072
, ,
Features: Carbon fiber main frame (R) x 1 (1.6mm) Bearing ...RCPlanet
ALIGN T-REX 250 SPECIAL WASHER AGNH25054A
, ,
Features: Hexagonal screw hole 1.3mm M1.5 special washer (F1.5xF2.7xF3.6x1.2mm) x ...